CCS9000 Series Dial-up Multi-Port Modem/Data Switch
 |
| Dial-up Multi-Port Radio Modem/Data Switch |
Data-Linc's CCS9000 Dial-up Multi-Port Modem/Data Switch, which communicates with the DLM dial-up master at the control site, is designed and configured to provide unlimited range and the highest level of full duplex data communication reliability to industrial automation equipment from one or more central locations.
 |
| Data-Linc's Dial-up modem Master at control site |
The CCS9000's remotely selectable four port switch permits connection to four different controller devices at any location using only one telephone line. A fifth port allows for connection of CCS9000 Leased Line or Radio Master Modems to create a multi-path system.
Features and Benefits
Addressable
Data-Linc's CCS9000 Dial-up Remote Modem/Data Switch is specifically addressed with a unique code for use with Data-Linc's CONNECT software or Traffic Connections, a version specifically designed for Traffic Management and control applications.
Four RS232 Ports
Each Dial-up Modem/Data Switch Has four RS-232 ports that allows for the connection of four different remote devices.
Remote Port Selection
Using the Data-Linc's CONNECT software program, both a specific remote modem and a specific port can be selected and connected, providing a communication link with any device on the network from a central location. Use Traffic Connections for traffic applications.
Transparent Connections
Connecting to a specific device at a specific location is accomplished with only a few mouse clicks from any central location. All connection commands are automatically and transparently sent. Once the connection is made, a full duplex data path is created. The specific software program of the remote device is then launched and used for acquiring data, troubleshooting, or reprogramming.
Extended Temperature
Due to the harsh environment in which the CCS9000 System may be required to function, each of the modems has been designed to operate in a temperature range of -40° to +167°F (-40° to +75°C).
Integrated System
The CCS9000 Dial-up Remote Modem/Data Switch is designed to provide a seamless interface with all other CC9000 Multi-Port Modems. This permits communication over multi-path networks, including leased line and wireless. The CCS9000 also permits centralized selection of desired baud rate, port selection, and partial or full disconnect using CONNECT software menu prompt command mode. The result is a unique, highly efficient non-proprietary network that is economical to purchase, simple to install and easy to use. Choose Traffic Connections for Traffic Management and Contol.
Specifications
General
- Unlimited range
- Four remotely selectable serial ports
- Capability to change ports without hanging up
- Full or half duplex communications when connected
- Remotely selected location and port
- Connected address and port verifcation
- Remote baud rate selection
- No handshaking lines or signals required
Operating Temperature
-40° to +167°F (-40° to +75°C)
Humidity
0-90% - non-condensing
Connectors
Telephone Line - RJ11
RS232 - Four DB9 Male
Enclosure
Metal
Power
9 VAC
Supported Protocol
CCITT V.32 (9600 only) V.22bis, V.21
Bell 212A & 103
Data Format
Asynchronous Serial
10 bit word
Data Rates
1200 to 19.2 Kbaud uncompressed
Data Configuration
Factory configured for optimum data transmission with compression, handshaking and error correction disabled
Indicators
Power
Speaker
Carrier Detect
Data In and Out
Selected Port 1-4
Integrated System
The CCS9000 Dial-up Remote Modem/Data Switch is designed to provide a seamless interface with all other CC9000 Multi-Port Modems. This permits communication over multi-path networks, including leased line and wireless. The CCS9000 also permits centralized selection of desired baud rate, port selection, and partial or full disconnect using CONNECT or Traffic Connections software.
|
Chinese
Español