CCS9000 Series Leased Line Multi-Port Modem/Data Switch
 |
| Leased Line Multi-Port Radio Modem/Data Switch |
Data-Linc's CCS9000 Leased Line Multi-Port Modem/Data Switch is designed and configured to provide the highest level of data communication reliability to and from industrial automation equipment. Up to 200 Leased Line Modems can be multi-dropped and uniquely addressed from a single CCS Master Modem on a branched, two wire network. A proprietary line interface circuit prevents excessive carrier signal attenuation in multi-drop operation and ensures reliable connections and data communication.
The CCS9000's remotely selectable four port switch permits connection to four different controller devices at any location using only one twisted pair line. A fifth port allows attachment of CCS Radio Master Modems for operation of a multi-path system.
Features and Benefits
Addressable
Data-Linc's CCS9000 Leased Line Remote Modem/Data Switch is specifically addressed with a unique code for use with Data-Linc's CONNECTTM software program or with Traffic ConnectionsTM software specifically for Traffic Management and Control.
Four RS-232 Ports
Each Leased Line Modem Has four RS-232 ports that allows for the connection of four different remote devices.
Remote Port Selection
Using the Data-Linc's CONNECT software program, both a specific remote modem and a specific port can be selected and connected, porviding a communication link with any device on the network from a central location.
Transparent Connections
Connecting to a specific device at a specific location is accomplished with only a few mouse clicks away from any central location. All connection commands are automatically and transparently sent. Once the connection is made, a full duplex data path is created. The specific software program of the remote device is then launched and used for acquiring data, troubleshooting, or reprogramming.
Extended Temperature
Due to the harsh environment in which the CCS9000 System may be required to function, each of the modems has been designed to operate in a temperature range of -40° to +167°F (-40° to +75°C).
Integrated System
The CCS9000 Leased Line Remote Modem is designed to provide a seamless interface with all other CC9000 Multi-Port Modems. This permits communication over multi-path networks, including dial-up and wireless RF. The CCS9000 also permits centralized selection of desired baud rate, port selection, and partial or full disconnect using CONNECT software menu prompt command mode. The result is a unique, highly efficient non-proprietary network that is economical to purchase, simple to install and easy to use.
Specifications
General
- Remotely addressable
- Four remotely selectable serial ports
- Up to 200 remote modems on two wire leased line or private wire, multi-branched networks
- Full or half duplex communications when connected
- Remotely selected location and port
- Connected address and port verifcation
- Remote baud rate selection
- No handshaking lines or signals required
Operating Temperature
-40° to +167°F (-40° to +75°C)
Humidity
0-90% - non-condensing
Connectors
Leased/Private Line - RJ-11
RS-232 - Four DB9 Male
Dimensions
Metal enclosure
Power
9 VAC
Data Format
Asynchronous Serial
10 bit word
Data Rates
1200 to 19.2 Kbaud uncompressed
Data Configuration
Factory configured for optimum data transmission with no compression or handshaking required
Range
Up to ten miles of branched network, depending on wire size, condition and number of drops.
Indicators
Speaker
Power
Tone Detect
Carrier Detect
Data In and Out
Selected Port 1-4
|
Chinese
Español