The FLC830E's long-range capability—up to 6 miles (9.6 km) line-of-sight (LOS), farther with Repeaters—along with its exceptional speed (up to 54 Mbps) support data transfer on a single network for real-time security/surveillance networks where SCADA is also required. Additionally, it provides the user with data prioritization through QoS (Quality of Service), permitting user-adjusted preferential data service for reduced data latency— the transmission time for a data packet to travel from point A to point B.

The combination of these outstanding features has produced a data communication product with exceptional performance. The FLC830E is extremely robust and reliable. The high speed and OFDM greatly enhance plant floor performance by reducing LOS issues and multi-path fading caused by RF reflection that can be particularly troublesome for plant-floor data transfer— conditions that constrain data rates and reliability in typical high-speed data systems. The FastLinc FLC830E also supports modern encryption standards (AES, TKIP, WEP) for enhanced security.

The OFDM technology permits data transfer that supports complex modulation and the resulting high data rates with low latency. The advantages of the 802.11 speeds, 2.4 GHz band and immunity to multi-path fading permits the FLC830E to provide high data transfer rates while maintaining excellent noise resistance and improved line-of-sight issues. For long distances, challenging plant-floor LOS issues and high data rate needs, the FastLinc FLC830E is the ultimate solution.

FastLinc FL830E Specifications

Included.
CD. User Manual
Antenna. 0 dBi bench test antenna
Other. Ethernet Cable, Power Supply, Quick Start Guide

Transmitter:
Distance. Up to 6 miles (9.6 km) LOS with Yagi antennas
RF Output Power. 200 mW (23 dB), EU version < 100 mW
Modulation. CCK, OFDM
Spreading Code. Direct Sequence
Channels. 11 (USA) 14 (other countries)
Occupied bandwidth. 5 MHz, 10 MHz or 20 MHz

RF Data Transmission:
RF Encryption. AES, TKIP, WEP, WPA, WPA2
RF Data Rate. 6, 9, 12, 24, 36, 48 or 54 Mbps

Operating Modes:
Base Station, Station Adaptor and Interbuilding with Repeating

Data Throughput:
1 Mbps to 20 Mbps
(depending on range and link quality)

Connections:
Antenna. 1 reverse polarity SMA Connector, female, 50 Ω
Ethernet. 10Base-T/100Base-T
Power. 10-28 VDC

Indicators:
Status LED's including
Power
Status
LAN (Link-Act)
LAN (100)
WLAN
RSSI ^* in SA mode (5 stages)

Operating Environment:
Humidity. 0 to 90% non-condensing humidity
Working Temp. -40° to 75° C (-40° to 167° F)

Enclosure
Standard. 18-gauge steel with mounting flanges
Dimensions. 7.6 x 5.6 inches (19.3 x 14.3 cm);
9.4 x 5.6 inches (23.9 x 14.3 cm) with mounting flanges
Optional. DIN rail mounting

Shipping Weight:
appx 1.8 lbs (0.82 kg)

^*Receiver signal strength Indicators