Its long-range capability—up to 10 miles line-of-sight (LOS), farther with Repeaters— along with its exceptional speed (up to 54 Mbps) supports data transfer on a single network for real-time security/surveillance networks where SCADA is also required. Additionally, it provides the user with data prioritization through QoS (Quality of Service), permitting user-adjusted preferential data service for reduced data latency— the transmission time for a data packet to travel from point A to point B.

The combination of these outstanding features has produced a data communication product with exceptional performance. The FLC910E is extremely robust and reliable. The broadband and OFDM greatly enhance plant floor performance by reducing LOS issues and multi-path fading caused by RF reflection that can be particularly troublesome for plant-floor data transfer— conditions that constrain data rates and reliability in typical high-speed data systems. The FastLinc FLC910E also supports modern encryption standards (AES, TKIP, WEP) for enhanced security.

The OFDM technology permits data transfer via a wide channel that supports complex modulation and the resulting high data rates with low latency. The advantage of the 900 MHz band, widechannel modulation and immunity to multi-path fading permits the FLC910E to provide high data transfer rates while maintaining excellent noise resistance and improved line-of-sight issues. For long distances, challenging plant-floor LOS issues and high data rate needs, the FastLinc FLC910E is the ultimate solution.

FastLinc FLC910E Specifications

Included.
CD. User Manual 1
Antenna. 2.15 dBi bench test antenna
Other. Ethernet cable, power supply, Quick Start Guide
Power Supply. Wall mounted transformer. 120- 240 VAC. 50/60Hz

Transmitter:
Distance. 10 miles (16 km) LOS with omni antennas
RF Output Power. 316 mW (25 dB)
Modulation. CCK, OFDM
Spreading Code. Direct Sequence
Channels. 3
Occupied bandwidth. 5 MHz, 10 MHz or 20 MHz

RF Data Transmission:
RF Encryption. AES, TKIP, WEP, WPA, WPA2
RF Data Rate. 6, 9, 12, 24, 36, 48 or 54 Mbps

Operating Modes:
Base Station, Station Adaptor and Interbuilding with Repeating

Data Throughput:
1 Mbps to 20 Mbps
(depending on range and link quality)

Power:
10-28 VDC
max 250 mA @ 24 VDC
max 1100 mA @ 12 VDC

Connections:
Antenna. SMA connector (Female), 50 &Omega
Ethernet. 10Base-T/100Base-T
Power connector. Latching screw terminal

Indicators:
Status LED's including
Power
Status
LAN (Link-Act)
LAN (100)
WLAN
RSSI ^* in SA mode (5 stages)

Operating Environment:
Temperature. -4 to 167 F (-20 to 75C)
Humidity. 0 to 95% non-condensing humidity

Enclosure
Standard. 18-gauge steel with mounting flanges
Dimensions. 7.6 x 5.6 inches (19.3 x 14.3 cm); 9.4 x 5.6 inches (23.9 x 14.3 cm) with mounting flanges
Optional. DIN rail mounting

Weight:
appx 1.8 lbs (0.82 kg)

^*Receiver signal strength Indicators