• Remote data tracking and control

• Factory configured for ease of installation

• Multi-port, smart remote communications

• Data transfer versatility- wire and wireless

• Multi-device communication via easy to use CONNECT^TM or Traffic Connections^TM software

Multi-Port, Multi-Path Communications

The Data-Linc Group CCS9000 Comprehensive Communication System (CCS) is a multi-port, multi-path data communication system that provides monitoring, troubleshooting and programming of remote data tracking and controller devices from one or more central locations, 24- hours a day.

Communications can be established over virtually any communication medium or combination of paths— Telco dial-up and leased lines, private wire and wireless. Any central location with a computer can communicate with any remote device through the serial data port at any distant location using the CCS9000.

CCS9000 modems are designed for optimal compatibility and connectivity. Any remote device— wire and wireless— with an asynchronous serial port can communicate to a Master computer through the CCS9000. Each of the CCS Remote modem data switches have four, address selectable DB9, RS232 ports. Port splitter cables can be used to connect to multiple devices that are addressable through their own software. Multi-vendor remote devices can be connected to the CCS9000 single modem/multi-port smart switch. Once the connection is established, the system is transparent to the vendor software.

Making the Connection

The CCS9000 utilizes an addressable Remote modem/ multi-port smart switch and a Master computer running Data-Linc Group's Traffic Connections ^TM software designed for traffic management. Traffic Connections is a Windows^®-based software program that provides destination selection and connection commands for the CCS9000 hardware. Remote modem/switch types and location port connections are entered into the Traffic Connections database. When a communication session with a specific remote device is needed, the location and designated port of the device is selected from the traffic control software menu. The software allows the command center to monitor and control that device or switch with the click of a mouse to another device.

CCS9000 Comprehensive Communication System

Serial Ports:
Four DB9 male, RS232, DTE

Gateway Port:
5 pin Din (RS232)

Data Format:
Asynchronous Serial 10-bit word

Data Rates:
1200 Bps to 19.2 kbps (radio up to 115 kbps)

Modem Type:
Spread Spectrum Radio, Dial-up or Leased Line (see specific product data sheet for modem type specifications)

Master Unit shown with Multi-port Modem/Data Switch that communicates seamlessly with wireless serial, dial-up and leased line modems.

Operating Environment:
Temperature Range: 32° to +140°F (0° to +60°C)
Humidity: 0-90%, non condensing

Weight:
Master Device: 1.8 lb. (.82 kg)
Remote Multi-Port: 4 lb. (1.83 kg)

Enclosure:
Standard: 18-gauge steel enclosure with mounting flanges
See diagram below

CCS9000 Multi-Port Wireless Serial Radio Modem/Data Switch

Media Type:
Wireless serial radio

Range:
Up to 25 miles (installed range up to 35 miles) with line-of-sight omni directional antennas— farther with Repeaters or directional antenna

Frequency:
License-free, 902-928 MHz

Modulation:
Algorithmic frequency hopping spread spectrum

Radio Frequency Power:
One Watt maximum; selectable setting from 1/10th Watt to one Watt.

CCS9000 Multi-Port Dial-up Modem/Data Switch

Media Type:
Dial-up

Modulation:
CCITT V.34, V.32, V.22bis, V.21 and Bell 212A

Line Connector:
RJ11 Female

CCS9000 Multi-Port Leased Line Modem/Data Switch

Media Type:
Two-wire leased or private line

Modulation:
CCITT V.34, V.32, V.22bis and Bell 212A

Operation:
Point-to-Point or multi-point (up to 200 drops)

Line Connector:
RJ11 Female

CCS9000 Master Device Enclosure Dimensions

CCS9000 Multi-Port Modem/Data Switch Enclosure Dimensions

Data-Linc Group
3535 Factoria Blvd. SE, Suite 100 • Bellevue, WA 98006 USA
Tel (425) 882-2206 • Fax (425) 867-0865 •